Well after a few days of confusion with the patina, Tracker the poodle finally gets his coat. The patina artist did an outstanding job, capturing Trackers likeness. Tracker has an unique discoloration on his tail; therefore, the client decided to incorporate it into the bronze.
This blog will share the complete start to finish process for the life-size bronze poodle sculpture.
Bronze Poodle Sculpture
Showing posts with label bronze dog. Show all posts
Showing posts with label bronze dog. Show all posts
Friday, March 11, 2011
Tuesday, January 4, 2011
Dog Matrix Mold Fabrication
Cellophane is used to wrap the entire sculpture. This will temporarily protect the dog sculpture from having the water-based clay adhere to my Chavant clay (Chavant NSP hard was used to sculpt the poodle). The water-based clay mass will later be replace by the silicone.
Here you can see where one of the seams with keys is located. A wall of clay is used to cover the entire area where the silicone will eventually go. The wall of clay is somewhat uniformed in thickness.
Plaster and hemp are applied over the wall of clay. This section is referred to as the “mother mold”. The mother mold will house the silicone mold and help line up all the keys.
Here are two completed (limb) molds.
This image depicts the mother mold after the cellophane and water-based clay have been removed. The other half of the mold will be used to enclose the leg. The seams will also be temporally sealed in order to prevent the silicone from escaping. The silicone will be poured from the highest point of the mother mold.
This image taken minutes after removing one half of the mold. The blue material is the silicone. The silicone is used to capture all the detail from the original sculpture. The next step is to remove the original clay sculpture from the silicone.
Wax is then poured into the mold in order to produce the wax-positives. More on this later….
The American Fine Arts Foundry is the Bronze Casting Foundry I am utilizing for this bronze dog composition. The foundry is located in Burbank, California.
click on the logo to visit their site.
click on the logo to visit their site.
Thursday, September 16, 2010
Thursday, July 29, 2010
Possible standing poodle poses for the bronze statue of Tracker



Labels:
bronze dog,
bronze poodle,
poodle,
poses,
sitting,
standing
Subscribe to:
Posts (Atom)
Live sculpting broadcast by HandsofCaesar.com
The top screen is used when I am broadcasting live from www.ustream.tv/channel/tutorial%3A-how-to-sculpt-in-clay---artistsculptor
When I am not broadcasting a list of current short movie clips are played.
I will try my best to embed the short videos recorded from the live broadcast on this blog.

click here or on the image to see me live on
my ustream.tv channel... 12:00 - 6:00 PM PST











